Dandellion/Misc-small-projects
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Update README.MD

Browse Source
This commit is contained in:
Daniel Løvbrøtte Olsen 2017-09-14 21:00:45 +02:00 committed by GitHub
parent 6837975643
commit a1d2d9d88f
1 changed files with 0 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
School/vg2/borg/README.MD
View File

@ -50,7 +50,6 @@ We had access to third grade's 3D printer, and we printed out our grids.
![](./docs/backgrounds.jpg)
Our first plan was 5cm<sup>2</sup> squares,but after a few tries the walls were just too thin.
So we had to cut down to 4.6cm x 4.6cm x 5cm. With the wall thickness being 0.4cm. Thus keeping our ~15cm<sup>2</sup> requirement.
![](./docs/grid.jpg)
As it turned out, the plexiglass plates spread the light so well, it largely offsetted the screen-door effect. And this gap turned out fine.
Our first couple of prints failed, most likely due to too little infill on the 3D printer's settings, the walls became too brittle, and failed during the print. We were lucky however and got one column printed (attatched to two columns of fail).
After yelling at third grade so they would up the infill, our prints succeeded. The plastic color also changed during this, from white to brown.